ADVANCED NONDESTRUCTIVE TESTING · SINCE 1987Talk to TesTex   412.798.8990

Home NDT equipment

Designed & manufactured by TesTex

NDT equipment

Products

TesTex products are all manufactured at our home branch in Pittsburgh, PA. Each probe, scanner, and system box has decades of research, development, and field service experience built in. Why do we go through so much trouble? It’s simple, at Testex, we think you deserve the best products.

TesTex equipment

Claw BFET Inspection Tool

What if you could get a better picture of your HRSG Tube to Header Welds? The Tube to Header welds in HRSG's are a common failure item,…

View details : Claw BFET Inspection Tool
TesTex equipment

Echo2020

Echo 20/20 Ultrasonic Thickness Gauge The Echo 20/20 is an innovative, yet easy to use instrument for ultrasonic thickness gauging. This handheld thickness gauge is fully compatible…

View details : Echo2020
TesTex equipment

Element BFET

Element Portable BFET System (Balanced Field Electromagnetic Technique) Crack detection to a depth of up to 3/8” (9.5 mm) below the surface Minimum surface preparation No couplant…

View details : Element BFET
TesTex equipment

Falcon Mark II

Falcon Mark II Falcon Mark II Tank Floor Inspection System Uses the principles of Low Frequency Electromagnetic Technique (LFET) for inspection of tank floors, shells and plates…

View details : Falcon Mark II
TesTex equipment

Falcon S Series

Falcon S Series Tank floor scanner based on Saturation Low Frequency Eddy Current Technique Operates by saturating floor plates with an electromagnet and then scanning for defects…

View details : Falcon S Series
TesTex equipment

Helix-XT II IRIS

Helix-XT II IRIS The Helix-XT II is an ultrasonic based system for inspecting ferrous and non-ferrous tubes from the inside. It is based on the Internal Rotating…

View details : Helix-XT II IRIS
TesTex equipment

Line CAT

Line CAT Using the Low Frequency Electromagnetic Technique (LFET), the lightweight, aluminum, TesTex Line CAT quickly scans from the outer diameter to detect both ID and OD…

View details : Line CAT
TesTex equipment

Line CAT Plus

Line CAT Plus The Line CAT Plus takes the field knowledge we have gained from using the Line CAT and improves upon it to create a robust…

View details : Line CAT Plus
TesTex equipment

Mag Wave ET

MagWave MWET To inspect ferrous tubes, TesTex developed the MagWave Electromagnetic Technique, which uses special probes with the Onyx IV. A wide variety of probes are available…

View details : Mag Wave ET
TesTex equipment

Onyx IV

Onyx IV ECT Inspection System The TesTex Onyx IV ECT Inspection System is based on the Eddy Current Technique (ECT) to quickly and accurately inspect non-ferrous metal…

View details : Onyx IV
TesTex equipment

OSET Scout

OSET Scout Experience TesTex's cutting-edge solution for detecting Corrosion Under Insulation (CUI) with our proprietary Off Surface Electromagnetic Technique (OSET). Introducing the Scout system, designed to eliminate…

View details : OSET Scout
TesTex equipment

Probes

Probes Common Probe sizes now available for quick checkout in our New Store! LFET Probes and Scanners Our Low Frequency Electromagnetic Technique (LFET) scanners and probes are…

View details : Probes
TesTex equipment

Prodigy 8C

Prodigy 8C Scanner The Prodigy 8C is an innovative OD scanning system that permits testing of in-service tubes and pipes for almost any boiler. What makes the…

View details : Prodigy 8C
TesTex equipment

PS 2000

PS-2000 Inspection System The TesTex PS-2000 Multichannel NDT inspection system has been replaced by the Triton II LFET Inspection System.

View details : PS 2000
TesTex equipment

Reporting Mapping

Reporting & Mapping At TesTex, we are not just about state-of-the-art, non-destructive testing products and services. Our customers must be able to act quickly based upon accurate,…

View details : Reporting Mapping
TesTex equipment

Seeker Probe

The Seeker "Find what you are looking for" Easy to use, stand alone video scope Visually inspect hard to reach areas with limited access Used with a…

View details : Seeker Probe
TesTex equipment

Triton II

Triton II Multi-Channel / Multi-Technique Portable NDT System TesTex has taken the TRITON NDT System and packaged it into a portable touch screen device. The new TRITON…

View details : Triton II
TesTex equipment

Triton II BFET

Triton II BFET System (Balanced Field Electromagnetic Technique) Detects both surface and sub-surface cracks in welds and base metals Minimum surface preparation No couplant required Scanning speed…

View details : Triton II BFET
TesTex equipment

Triton II LFET

Triton II LFET System (Low Frequency Electromagnetic Technique) Utilizes up to eight channels with low signal-to-noise ratio Detect flaws, including corrosion cells, hydrogen damage, caustic and phosphate…

View details : Triton II LFET
TesTex equipment

Triton II RFET

Triton II RFET System (Remote Field Electromagnetic Technique) Utilizes one to eight channels with low signal-to-noise ratio Detects and quantifies flaws, including corrosion, erosion, pitting, cracking and…

View details : Triton II RFET
TesTex equipment

TS - 2000

TS-2000 Tube Scanning System The TesTex TS-2000 Tube Scanning System has been replaced by the Triton II RFET / LFET Inspection System.

View details : TS - 2000
TesTex equipment

Ultima PAUT/FMC

Meet the Ultima — TesTex’s Advanced PAUT/FMC/TFM Inspection System Precision. Versatility. Performance. The Ultima is TesTex’s premier PAUT (Phased Array Ultrasonic Testing) device, engineered for high-performance inspections…

View details : Ultima PAUT/FMC
TesTex equipment

Viper Crawler

Viper Crawler System Strong permanent magnetic wheels hold the system to the magnetic surface even through several layers of paint Long lasting, high torque planetary gear mechanism…

View details : Viper Crawler

Let's plan your inspection

Your next turnaround starts here.

Tell us about your equipment, your scope, and your schedule.

Talk to an inspection specialist