 |
Ya TesTex TX-4,400 ECT System Ukaguzi ni misingi ya Eddy Hali Technique kwa haraka na kwa usahihi kukagua zisizo na feri, chuma neli kutoka ID tube. Hutambua na ukubwa ID / OD pitting, baffle kukata, mmomonyoko wa udongo, mvuke impingement, jumla ukuta hasara, na mengine kasoro. Maombi ni pamoja na:
Ya TX-440 inatoa nane njia ya kawaida na ya nyingi ya njia kuchanganya kwa flaw bora sizing na kwa kutambua na aina mbalimbali 1KHz na 1.2MHz frequency, na automatiska na Mwongozo wa uchambuzi kufanyika kwenye-site. It is fully digital and offers real-time mixing and a wide variety of special data filters and is compatible with bobbin, uso, na magnetic kueneza probes. |
signaler zisizohitajika kama vile sahani msaada unaweza kuwa suppressed, na mfumo inaweza kutumika kwa kushirikiana na wetuTS-Map naAR-Wizard programu; hivyo, ripoti ya mwisho inaweza kuwa mikononi on-site.
TheTX 4,400-pia inaweza kutumika kwa ajili ya ukaguzi feri ya kuchunguza dosari kubwa na pitting ndogo na kupambanua kati ya ID na madhaifu OD. (Kueneza inaweza kurekebishwa ili kuondoa signal kelele kutokana na zilizopo finned, pia.)
Mfumo ina tofauti na majibu kamili kwa kila frequency na kujengwa katika ishara ya kumbukumbu ya kuzalisha signal kabisa bila ya matumizi ya kuchunguza kumbukumbu.
Ya TX-4,400 sanduku umeme ni pamoja na kompyuta mbali ya kuendesha mfumo kupitia programu MS Windows makao. Takwimu zote Archived kwa ajili ya uchambuzi na usindikaji kama vile kwa kulinganisha kwa ajili ya ukaguzi wa baadaye.
Halisi wakati kuchanganya inapatikana kwa kukandamiza msaada sahani baffle /. Mfumo huo ili kuangalia modes kabisa na tofauti kwa wakati mmoja.
bodi ya elektroniki ni huru iliyoundwa kwa ajili ya operesheni ya kuruhusu rahisi troubleshooting, kukarabati, na upanuzi. Kila mmoja wa bodi kuu mzunguko ni iliyoundwa na kutenda kama mfumo kamili karibu moja frequency. frekvenser Zaidi unaweza kuongezwa kwa mfumo na mzunguko inserting bodi ya ziada kwa bodi ya backplane.
Kutegemea juu ya Configuration, ya TX-4,400 inatoa aidha high-speed ukaguzi, ambayo hutoa upeo kasi ya miguu tano kwa pili (1.52m / sec) au Ultra-high kasi insertion, ambayo ina upeo kasi ya ft 20 / sec.
, na probes inaweza kuwa inaendeshwa mwenyewe au na mmoja wa madereva wawili hiari probe: ya 6k PD au PDP 22.
Wote kuungana moja kwa moja kwa TX-4,400 na kutumia programu moja, na ni muda mrefu na ya kuaminika.
PD 6k
Kama jina lake inadokeza, ya 6k PD ni kilo sita (6 kilo au 13.2 pound) probe dereva.
It is extremely portable and lightweight.
It permits high-speed probe insertion, adapts to different air fittings, and needs only (regular) plant air to operate.
With the PD 6k, it is possible to inspect up to eight tubes per minute and 2,000 – 3,000 tubes per team per 12 saa kuhama.
The PD 6k can be used with ferrous or non-ferrous metal.
PDP 22
The PDP 22 fits in 16” (406mm) manways, and permits retrieval and inspection at constant speed. Maximum insertion speeds are 20 ft/sec (6.10m/sec), and maximum inspection speeds are 10 feet/sec (3.05m/sec).
It is “over-designed” to ensure a long operating life, and its modular components are easy to maintain and repair. It allows 110/220V operation.
With its automated analysis, it can inspect up to twelve (12) tubes per minute, na 4,000 – 5,000 tubes per team per 12-hour shift.
EMEC (ElectroMagnetic Eddy Current)
To inspect ferrous tubes, TesTex developed the EMEC technique, which uses special probes with the TX-4400. A wide variety of probes, which operate at frequencies of 1KHz to 500KHz are available, and they can automatically inserted with the PD 6k. As with our ECT probes, automated analysis is available.
With strict quality assurance procedures, all probes and accessories manufactured by TesTex are of the highest quality; hivyo, we are able to provide probes with both excellent response signals and very low noise levels.
